Service is
our only
business
Nimmer Marine Service, Inc.
"Spend your time on the water, not in the shop!"
Custom Boat Building>
Mongoose Racer 20
Introducing,
Nimmer Marine Service's

Custom Boat Works
Solid Construction

White Oak frames epoxied with West
System are fastened together using
silicone bronze and stainless steel
hardware.
Materials
-Solid oak stringers and cross frames
-3/8 inch BS1088 mahogany plywood skin
-Epoxy coated hull
-Hard, scratch resistant, two-part PPG
paint for a lifetime of shine and color
Construction
Low Maintenance Exterior
After a coat of epoxy, the hull is covered with Dynel fabric also saturated
in epoxy and then painted with PPG Omni CV to produce an industrial
finish.  The wood deck is finished with epoxy containing a UV resistant
hardener and finish coated with Bristol Yacht Finish's traditional amber, a
two-part urethane.
Custom Features
Solid Mahogany
Admire your reflection in the solid
mahogany dash board while you feet
rest on the oiled teak and holly floor.  
White captain chairs adjust front to
back on stainless steel sliders.
Engine Controls
The keyless state-of-the-art remote
ignition system starts the engine with
the push of a button.  Dual-levered
throttle and shift controls allow for
high-speed manuevering, while engine
trim and tilt switches are mounted
forward of the steering wheel for safe
operation.
Stainless Steel Hardware
Low-profile, stainless steel fittings
over the entire boat give it a
modern yet classic style.
Convenient Storage
Flush-mounted rear deck hatches
conceal rigging and provide
storage for gear.  Compartment
illumination is triggered when
hatches are raised.